Home >> Products >> High Speed Single / Two Point Presses
 

‘Kaushico’ Single / Two Point high speed presses are steel plated fabricated, Double Sided, Double Column in single piece (‘H’ Frame) Construction, Ungeared, Fixed Stroke with Variable Speed AC Drive Motor, Pneumatic Friction Clutch combined with Brake Unit, along with Hydraulic Jam Release Device.

  • Foot Single
  • Foot Continuous
  • Two Hand Single
  • Inching
  • Clutch ‘On’ & ‘Off’ Position

The machine will be equipped with electrical suitable for 400/440 volts, 3-phase, 50-cycles, A.C. Mains and balance standard specifications are as under:-

Single Point High Speed Presses

Model   KHS-16 KHS-25 KHS-40 KHS-63 KHS-80 KHS-100 KHS-160
Capacity Tonne 16 25 40 63 80 100 160
Stroke Length mm 25 25 25 25 30 30 30
Stroke per min. Spm 150-300 150-300 100-250 100-250 100-200 100-200 80-160
Die ht. mm 225 225 225 250 315 315 315
Slide Adjustment mm 32 40 40 40 40 40 50
Slide area LRxFB mm 280x250 370x300 425x350 460x350 500x400 500x400 580x500
Bolster area LRxFB mm 360x360 450x450 500x500 560x560 630x630 630x630 700x750
Bolster thickness mm 80 80 80 100 110 110 120
Bed opening LRxFB mm 150x100 250x110 300x150 360x160 430x200 430x200 500x200
Side opening
(F-B) x HT in column
mm 160x160 200x200 200x200 200x200 250x250 250x250 315x315
Main Motor kw 5.5 5.5 7.5 7.5 11 11 15
Air Pressure Atm. kg/cm2 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Technical Specifications are subject to modifications without prior notice.

Standard Accessories:

Available Optional Features and Accessories:

  • PLC Controlled
  • Electrical suitable for 400/440 volts, 3 phase, 50 cycle, AC mains including variable speed motor.
  • Hydraulic jam release device.
  • Motorised / Ml ram adjustment.
  • Solenoid Valve.
  • Rotor Seal
  • Automatic lubrication pump.
  • Filter, regulator & lubricator unit.
  • Cam limit switch.
  • Air reservoir tank.
  • Slide counter balancers.
  • Surge tank for air counter balancer.
  • Foot Switch.
  • Foundation drawing.
  • Instruction manual.
  • Stroke counter.
  • Shut ht Indicetor.
  • Roll feeders.
  • Gripper feeders.
  • Pneumatic feeders.
  • Straightners.
  • Motorised/Non-motorised, single/double ended decoilers and recoilers.
  • Scrap choppers.
  • Carrier arms.
  • Die lifters.
  • PLC drive.
  • Photo electric guards.

TWO Point High Speed Presses

Model   DHS-40 DHS-63 DHS-100 DHS-125 DHS-160 DHS-200 DHS-250 DHS-315
Capacity Tonne 40 63 100 125 160 200 250 315
Stroke Length mm 25 25 30 30 30 35 40 40
SPM-variable Tonne 100-200 100-200 100-200 100-200 90-180 90-180 90-180 80-160
Die ht. mm 260 315 330 350 350 400 450 450
Slide Adj. mm 40 40 40 40 50 50 50 50
Slide area (LRxFB) mm 600x350 700x400 1100x650 1150x750 1150x800 1800x800 1900x900 2000x900
Bolster area LRxFB mm 700x500 800x600 1250x800 1250x800 1350x800 1900x900 2000x1000 2000x1000
Bolster thickness mm 80 100 130 140 175 220 230 250
Bed opening LRxFB mm 500x200 600x225 950x315 980x325 1100x325 1450x380 1500x380 1700x380
Side opening (FBxHt.) mm 225x200 250x200 450x250 450x250 450x300 450x350 450x350 450x350
Main Motor kw 7.5 7.5 11 15 22 30 37 45
Air Pressure kg/cm2   5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Technical specifications are subject to modifications without prior notice.

A design that emphasizes stiffness and accuracy

Production is what the KHS/DHS is made for. Production means operating a tool at the highest stroke rates without risking breakage. It also means getting the largest number of parts from a tool between regrinds. This is only achieved if the tool is operated correctly, which requires stiffness, accuracy, and just the right tonnage from the machine. The machine is equipped with hydraulic jam release device. In case of jamming, there is no breakage of parts and it takes less than a minute to make the press operational again.

 

After Sales Service

 

‘Kaushico’ does more than supply machines and start them up. Indeed, our after sales service department is available for the servicing of any kaushico press, and can supply all the spares.

We know that to service a press is at least as important as to supply it, and we make it a point of satisfying your requirements very rapidly.

The machine is a versatile press designed with the user in mind. It is easy to operate, easy to maintain, and carries all required safety monitoring devices to permit years of trouble free operation.

Back to Top