Home >> Products >> Guillotine Shearing Machines
 

Kaushico Shearing Machine is fabricated out of heavy rolled steel plates. A heavy welded steel crown tied together with the upper end of frame holds the machine is accurate alignment.

  • Each end of the bed is accurately located in the frame by means of broad faced tongue and grooves. Machining under close tolerances on Skoda Boaring m/cs assures a precision fit. Broad contact surfaces give positive positioning and accurate alignment of knife seat and guide bearing surfaces.
  • Frame and bed are welded steel construction and are duly stress relieved.
  • Mechanically interlocked pneumatic friction clutch and brake unit is provided. This will be electro pneumatically operated. The cooling of the clutch is done by fins and fan provided as a built in feature of the clutch. The wear is automatically compensated by the spring adjustment.
  • The ram would be made out of rolled steel. It would be guided smoothly and accurately throughout the stroke. Suitable counter balances would be provided for a smooth shearing action and for the return of the ram to its stop position.
  • All contractors, motor controls would be maintained in the master control cabinet. A five position selector switch would be provided for FOOT SINGLE, FOOT CONTINUOUS, INCHING CLUTCH ‘ON’ & OFF’ position.
  • Rigid and accurate construction of back gauge would be provided with the machine to allow consistent accuracy in the width of sheets being cut.
  • Shearing blades would be 4 edge working and of high grade allow steel, properly heat treated and ground.
  • The Hydraulic hold down system would be provided for positive and uniform for full length of work piece and close to the cutting edge to prevent slippage regardless of thickness variation.
  • The over drive system provided in the machine ensures the axis of shearing to go through the centre line of the shearing plane and thus ensure smooth cut.
  • Fly wheels are dynamically balanced.
  • The slide gibs are provided with phosphorus bronze guides which can be easily adjusted for wear.
  • The hydraulic hold down pressure can be adjusted with the help of valve provided in the system.

Specifications of Guillotine Shearing Machines

Shearing Thickness In M.S. (mm) Length (mm) Model Length Between Housing (mm) Rake Angle Approx Stroke Per Minute (Idle) Cycles per Minute Motor HP (1440 RPM) STD Back Gauge Range (mm) Overall Dimensions
Length Approx (mm) Width Approx (mm) Height Approx (mm)
3.15 2000
2500
3150
MKS-20-3
MKS-25-3
MKS-32-3
2100
2640
3200
1o-24’
1o-12’
1o-15’
60
55
55
25
20
20
7.5
10
10
500
500
500
2800
3340
3800
1800
1900
1900
2250
2250
2250
6.3 2000
2500
3150
KS-20-6
KS-25-6
KS-32-6
2100
2640
3350
1o-48’
1o-20’
1o-18’
50
50
50
18
18
18
15
15
15
500
500
500
2900
3540
4250
2200
2200
2200
2575
2575
2575
10 2000
2500
3150
KS-20-6
KS-25-10
KS-32-10
2100
2640
3350
2o-10’
2o-15’
2o-0’
30
30
30
10
10
10
20
20
20
500
500
500
3100
3640
4350
2600
2600
2650
2950
2950
3000
12 2000
2500
3150
KS-20-12
KS-25-12
KS-32-12
2100
2660
3350
1o-56’
2o-15’
1o-55’
25
25
25
8
8
8
25
25
25
500
500
500
3200
3700
4350
2600
2600
2600
2950
2950
2950
16 2000
2500
3150
KS-20-16
KS-25-16
KS-32-16
2200
2700
3400
2o-30’
2o-30’
2o-30’
20
20
20
8
8
8
30
30
30
500
500
500
3300
3700
4400
2700
2700
2700
3050
3050
3050
20 2500
3150
KS-25-20
KS-32-20
2700
3400
2o-30’
2o-30’
15
15
6
6
40
40
600
600
4000
4600
2950
2950
3500
3600
25 2500
3150
KS-25-25
KS-30-30
2700
3450
2o-44’
2o-44’
15
15
6
6
50
50
600
600
4100
4850
2950
2950
3600
3600

Standard Accessories:

  • Hydraulic power pack of reputed make
  • Electric motor of SIEMENS / NGEF/ABB make
  • Squaring arm
  • Front Support
  • Hand operated back gauge of range 0-500 mm
  • Hydraulic hold down plungers
  • Set of 4 edge working blades mounted on machine
  • Blade gap adjustment device through manually adjusting screw
  • Finger guards
  • Gearwheel/Flywheel guard
  • Moveable electrical foot pedal
  • Stroke counter
  • Instruction/Maintenance manual
  • Set of hand tools
  • Circuit diagram
  • Solenoid Valve, Rotor Seal, FRL Unit
  • Air Tank for Pneumatic Clutch

Available Optional Features and Accessories:

  • Motorised back gauge upto 1000 mm stroke
  • Ball Transfers
  • Squaring arm upto 1000mm
  • Front plate support arm
 
Kaushico Machine Tools, a pioneer in sheet metal machinery also manufacturers CNC/NC HYDRAULICS PRESS BRAKES, POWER PRESSES UPTO 1000 TONNES, HIGH SPEED LINES AND HYDRAULIC PRESSES UPTO 2000 TONNES.
 
Back to Top