Home >> Products >> Kaushico Solid Frame Presses
 

Kaushico Solid Frame Presses are utilized compact straight sided presses designed for minimal elongation and virtually eliminates angular deflection. It reduces the die maintenance cost considerably and increases the die life. Extra long 6 Point guides are centrally located in the slide to provide better resistance to the off centre loads.

  • PLC equipped electrical control panel
  • Hydraulic Overload safety device
  • Pneumatic combined clutch & brake unit
  • Electric motor of reputed make
  • 2 Nos. Pneumatic slide counter balancers
  • Motorised slide adjustment with brake motor
  • Pressure switches, Filters & Regulator for Clutch, Balancers & Die cushion
  • Automatic Centralised grease/oil pump for lubrication
  • 3 Position cam limit switch
  • Bolster & Slide Face with standard T Slots
  • Dual Sensing Solonoid valve with Rotor Seal
  • Use friendly multifunction control system

Kaushico Solid Frame Single Point Presses

Model   KSF-80 KSF-100 KSF-125 KSF-160 KSF-200 KSF-250 KSF-315
Capacity Tonne 80 100 125 160 200 250 315
T.R.P. mm 5 5 5 6 6 6 6
Stroke Length mm 100 150 150 200 250 250 250
SPM-Fixed SPM 55 50 50 45 35 30 25
Shut Height mm 300 350 350 400 450 450 500
Slide Adjustment mm 80 100 100 100 120 120 150
Slide Area (LRxFB) mm 700x460 800x520 800x520 900x580 1000x650 1100x720 1100x720
Bolster Area (LRxFB) mm 900x600 1000x680 1000x680 1150x760 1250x840 1350x900 1350x900
Bolster Thickness mm 110 125 125 150 170 190 200
Main Motor KW 7.5 7.5 11 15 18.5 22 30

Kaushico Solid Frame '2' Point Presses

Model   KSF-80 KSF-100 KSF-125 KSF-160 KSF-200 KSF-250 KSF-315
Capacity Tonne 80 100 125 160 200 250 315
T.R.P. mm 5 5 5 6 6 6 6
Stroke Length mm 100 150 150 200 250 250 250
SPM-Fixed SPM 55 50 50 45 35 30 25
Shut Height mm 300 350 350 400 450 450 500
Slide Adjustment mm 80 100 100 100 120 120 150
Slide Area (LRxFB) mm 700x460 800x520 800x520 900x580 1000x650 1100x720 1100x720
Bolster Area (LRxFB) mm 900x600 1000x680 1000x680 1150x760 1250x840 1350x900 1350x900
Bolster Thickness mm 110 125 125 150 170 190 200
Main Motor KW 7.5 7.5 11 15 18.5 22 30
Back to Top